5' X 10
4000 WATT AMADA GEMINI F0-3015 CNC LASER CUTTER
APPROXIMATELY 45,298 HOURS - NEW TURBO BLOWER & VACUUM PUMP @ 37,201 HOURS
1.1 Motion Package
Travel Method: Stationary table, X, Y and Z-axis movement for cutting head
Control Method: X, Y and Z simultaneous 3 axis control
Drive Motors: Fanuc AC servo motors
Maximum Sheet Size: 61" (Y) x 122.8" (X)
Maximum Axis Travel: 61" (Y) x 122.8" (X) x 7.87" (Z)
Maximum Axis Positioning Speed: 3,150 inches per minute (80m/min) per axis
(4,554 inches per minute 45o vector.
Maximum Speed Z-Axis: 2,362 inches per minute
Positioning Accuracy: 0.0004"/20"
Maximum Material Weight: 1,875 lbs.
Assist Gas: 4 ports with NC pressure Control
Machine Footprint: 385" x 107"
Machine Weight: 12 Metric Tons
Electrical Requirement: 208V, 3 Phase, 60Hz, 10KVA
1.2 CNC Controller
Model: Fanuc 160iL - 32 Bit
Display: LCD Color Graphics Display
Control Function: X, Y, Z-Axis Simultaneous and Focus Lens B-axis, Adaptive
Optic and Laser Power control (CW, Gated Pulse, Pierce Routines etc.).
Data Input Method: Manual (MDI), Edit, DNC, or 3 " PC compatible disk.
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Standard Memory: 512K (1280m)
Operating Modes: Automatic, MDI and Manual
Display Modes: Program Contents, Position Information, Program Check,
Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self
Diagnostics
Interlock Displays: Cooling Water Status, Gas Pressure Status, Vacuum Status,
Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Door Open, WACS.
Electrical requirements: See Motion Package
|
|
|
-&zid=19485 "laser - click to enlarge")